8 x 8 timber shed base kit made from pressure-treated 92 x 44 mm redwood
Close-up of simple screwed butt joint on timber shed base
Close-up of joist screwed into perimeter rail on timber shed base
Close-up of 92 x 44 mm pressure-treated redwood timber used in shed base
Close-up of pressure-treated timber shed base frame and joist spacing

Pressure-Treated Timber Shed Base Frames – 3×2 & 4×2

SKU: SBK32-0604
£94.99
Delivery Options

DELIVERY INFORMATION

Our products are delivered by parcel, pallet, or by our specialist
delivery and assembly team, depending on the item. Please check the product description for the delivery method and assembly details.

If you would prefer a parcel or pallet item to be delivered by our specialist team, please contact us before ordering. Additional charges and longer lead times may apply.

Estimated delivery times:

Parcel: 3–5 working days

Pallet: 5–10 working days

Garden Building Delivery & Assembly: 15–20 weeks

Please ensure there is suitable access for delivery. If access is restricted, let us know in advance to help avoid failed delivery attempts and possible redelivery charges.

For more delivery information, click here.
View details

A strong, straightforward timber foundation for sheds, summerhouses and garden buildings.

Made in Staffordshire from pressure-treated Scandinavian redwood and supplied as a flat-pack kit with the timber pre-cut to size, screws included and clear assembly instructions.

Choose your frame:

  • 3×2 Standard Heavy Duty – nominal 75 × 50 mm timber, finished approximately 69 × 44 mm. A substantial base for most standard timber sheds and garden buildings.
  • 4×2 Extra Heavy Duty – nominal 100 × 50 mm timber, finished approximately 92 × 44 mm. Recommended for heavier sheds, workshops, summerhouses or where maximum rigidity is wanted.

WHAT ARRIVES?
A flat-pack kit containing the required pre-cut pressure-treated timber lengths, screws and assembly instructions. Simply screw the frame together on a firm, level, well-drained surface.

Why use a timber base frame?

  • Creates a level support for your building
  • Raises the timber building away from the ground
  • Helps promote drainage and airflow beneath the floor
  • Avoids the time and mess of pouring a full concrete base
  • Can be installed before your shed or building arrives

Available sizes: 6×4, 6×6, 8×6, 8×8, 10×6, 10×8, 10×10, 12×8, 12×10 and 12×12 ft.

For easier handling and courier delivery, larger 12 ft bases are supplied in modular sections which join together during assembly.

Pressure-treated timber: pressure treatment protects the timber against rot, fungal decay and insect attack but does not make timber waterproof. Install the frame on a firm, level, well-drained surface and avoid leaving timber permanently sitting in standing water.

Made in Staffordshire by Churnet Valley Garden Furniture.

Why Churnet Valley?

Our furniture is eco-friendly because we only use wood from Scandinavian forests that are managed responsibly by the Forestry Stewardship Council (FSC). This means that when trees are cut down, more are planted in their place. We also take the extra step of having our wood pressure-treated to protect it against weather for many years. Most garden furniture today is made to last only three or four years, but our products are built to last almost four times longer, which helps protect the planet's natural resources.

All of our products are handmade. Since they are made from natural wood, you might see some small cracks or splits. This happens because wood can lose moisture in warm, dry weather or when exposed to strong sunlight. In cooler, wetter weather, the wood takes in moisture again, which can help reduce these cracks. These natural changes don't affect the quality of our products. We do our best to smooth out splinters and rough edges, but we might not catch every single one.